null

Rubber Housing Cap (Pair)

SKU:
RUBBERCAP
  • Rubber Housing Cap (Pair)
$15.00

Description

Seal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be the perfect solution to re-seal.

Sizing: Available in seven different diameters to fit the most common headlight flanges: 70/75/80/83/90/100/110mm internal diameter. We also have an all-in-one cap which is one solid piece with step-ups to each size (simply cut away the sizes you don't need). This range has steps at 70/75/80/85/90/95/100.

To Measure: Measure the outer diameter of your headlight's rear flange and select from the size menu above. If you're over by +3mm, we recommend going for the next size up and using a large zip tie to secure them. These caps do bend (for example an 83mm cap will fit over an 85mm opening)

Durable: Made of durable black rubber, they wont harden or crack over time through from hot and cold temperature changes. Ribbed inner ridge works to keep them fit snugly to the backside of the housing.

Sold as a Pair.

Actual product received may vary slightly from photos shown.

View AllClose