Just because you have a lot of gear, doesn’t mean you have to have a lot of mess. While standard storage might not cut it, the BuiltRight Industries Bedside Rack System can. Using the same factory mounting points, the rack system installs to keep your gear organized, easily accessible and secure. They work with all MOLLE/PALS accessories in addition to universal slots for all kinds of storage possibilities. Proudly made in USA with a Lifetime Warranty.
– Laser cut and CNC punched/formed for perfect fit
– Black texture powdercoat for corrosion resistance
– Extremely durable 11ga steel construction
– MOLLE/PALS compatible mounting features
– 1/4" slots throughout for endless mounting adjustability
– Patent Pending US 2019 / 0092213 A1
– Lifetime Warranty
– 1x Driver side rear panel
– 1x Front panel
– 2x Stainless bolts w/ black oxide coating
– 2x Rubber bumper
– 2x Plastic push rivet
Fitment Notes: Compatible with OEM Bed lights. Short bed and Long bed Tacomas use the same panels.
* Fitment Note: At this time, we cannot confirm fitment compatibility with all drop-in bedliner systems, as the various manufacturers take different approaches that are difficult to account for.
ENGINEERING & MANUFACTURING
Toyota did us the great favor of offering the Tacoma with utility rails on both sides with an optional rail at the cab wall. Unfortunately, these rails offer limited use without a variety of brackets and attachments. The BuiltRight Modular Bedside Rack System installs using these same factory mounting points, without the need for modification to the vehicle and leaves the utility rail completely unobstructed and available for use. The panels provide MOLLE-compatible features for the use of MOLLE/PALS accessories in addition to universal slots for an infinite number of possibilities. The growing selection of custom attachments offered by BuiltRight will help you secure a wide variety of gear, but these slotted features will also allow you to bolt just about anything to these panels.
– Store items that need to be easily accessible and organized
– Keep tools, straps, shackles, etc from rolling around in the bed of your truck
– Easily configured depending on intended use
– Made in USA. Lifetime Warranty. Patent Pending (US 2019 / 0092213 A1 ).
Installation of the Tacoma Bedside Rack System is our easiest ever. We worked hard to keep the design simple, requiring the fewest number of fasteners and brackets, which will not only save time, but minimizes opportunity for failure. A driver's side kit requires only two tools to install - a T30 torx bit and a 5/32 hex key allen wrench.
Prodcedure Overview: Using a T30 torx bit, you'll loosen the bolts securing the utility rail to the bedside. Removing the rear two will make space to slip the rear panel under the rail before reinstalling (loosely) the two bolts. Next, remove the front two bolts and slide the front panel under the rail before reinstalling those two bolts. If applicable, secure the rear panel using the bolts holding the trim or cubby panel in place and then tighten the utility rail bolts. A full bed setup will take 10-15min to install.