Note: Your order may be shipped with the new Glass fiber reinforced composite pull tab (which is a black pull tab instead of the red pull tab pictured).
We're trying out something new here - bundling products that are commonly purchased together. The Rear Seat Release and Dash Mount have become a very popular combo for the 2015+ F-150 and 2017+ F-250/350 trucks, we for a limited time, we'll be offering them together, with a bit a discount of over 10% and bundled shipping costs.
REAR SEAT RELEASE KIT
Laser cut and CNC formed for perfect fit
Bracket black zinc coated for corrosion resistance
NEW Glass fiber reinforced composite pull tab
Nylon strap hand sewn to latch pull
All components needed to outfit one latch
Steel retainer bracket
Pull strap and updated 2020 latch pull attachment
Finally, a simple and robust solution to accessing the area behind the rear seat backs in your 09+ Ford F-150 Supercrew, 15+ Ford F-150 Supercab, or 17+ F250 and F350. This complete solution provides an OEM-looking nylon pull strap that can be used to release the rear seat latch and fold down the rear seat. The bracket firmly holds the latch pull in place and also guides the strap towards the top of the seat for easy reaching.
2009 - 2014 F-150/Raptor Supercrew: These models can utilize two latch release kits (one each side of the 60/40 rear seat).
2015 - 2019 F-150/Raptor Supercab and Supercrew: These models store OEM tool kit behind the passenger side seat and use one latch release kit for the driver's side.
2017+ F-250 and F-350 Supercab and Supercrew: These models will utilize a single kit on the driver's side.
The BuiltRight Industries Dash Mount provides a rigid, durable mounting point for all types of accessories. With room for multiple mounts, users can attach and configure their devices with infinite adjustability. A popular combination with our product testers was cell phone, radar detector and dash cam, from left to right. The Dash Mount was born from the lack of phone mounts that give you the ability to position your device where you want. 'RAM' brand ball and socket mounts are an excellent addition to the Dash Mount and although we don't yet have them in stock, they are readily available on Amazon (see below). The slots used in the design are sized to accommodate AMPS standard attachments.
Installation is very straight forward. The laser cut and CNC formed bracket attaches to the tray located above the dash using four machine screws, included in the hardware kit. The four .25" holes used must be drilled by the user in the OEM tray. Should you choose to return to stock, the OEM rubber mat inside the tray conceals the holes.
The bracket is manufactured from 12ga mild steel and finished with a durable black texture powdercoat - a very close match to the OEM dash finish. Each kit contains the Dash mount bracket, four machine screws, four washers and four locking nylon nuts. Also included are printed instructions and a BuiltRight sticker!
DASH MOUNT SUPPORT PLATE (OPTIONAL)
This is the Dash Mount Support Bracket. Laser cut from 1/8in stainless plate, it’s meant to be installed below the dash tray to offer additional reinforcement and stiffness. The factory tray is quite rigid and for normal use, this bracket is absolutely not necessary. I have had zero issues myself. Maybe I’m not enough of a badass.
This product contains ONLY the support bracket. Hardware from your Dash Mount Kit can be reused.