Installation Accessories

Wire Harnesses

Installation Accessories

Add to Cart

KR Off-Road

KR Off-Road Air Compressor Switch/Coupler Bracket for Bedside Mounting System

$39.00

The KR Off-Road Switch/Coupler Bracket can be used in conjunction with some of our KR Off-Road Compressor Mounting Brackets (such as 40-2000 & 40-3000). This bracket mounts to the compressor bracket giving you a place to install your compressor...

45-1000

$39.00

Add to Cart
Add to Cart

KR Off-Road

KR Off-Road Extension Brackets for Baja Designs S2/Squadron Series Lights (Pair)

$28.00

These brackets are designed to allow you to mount your Baja Designs S2 or Squadron lights upside down (or right-side up in some installations). They'll also elevate your lights higher then the factory brackets if installed with the lights right side up...

10-1000

$28.00

Add to Cart
Add to Cart

Baja Designs

Baja Designs S2/Squadron Brackets, Black Powder Coating (Pair)

MSRP: $62.00

$55.00

These are replacement brackets for the Baja Designs S2 & Squadron Lights. These brackets are powder coated a matte black finish.This includes two (2) brackets. Mounting nuts/bolts/washers are included as well.

BD BRACKETS (S2/SQUADRON)

MSRP: $62.00

$55.00

Add to Cart
Add to Cart

Baja Designs

Baja Designs XL Brackets, Black Powder Coating (Pair)

$80.00

These are replacement brackets for the Baja Designs XL Series Lights. These brackets are powder coated a matte black finish. This includes two (2) brackets. Mounting nuts/bolts/washers are included as well.

BD BRACKETS (XL)

$80.00

Add to Cart
Add to Cart

KR Off-Road

KR Off-Road Brackets for Baja Designs LP4 Lights (Pair)

$59.00

These KR Off-Road Brackets for Baja Designs LP4 Lights are designed for customers looking to mount their Baja Designs LP4 lights using a different style mounting method. They include 1 complete pair of brackets (left and right side). The brackets can be...

10-2000

$59.00

Add to Cart
Add to Cart

KR Off-Road

KR Off-Road Rear Bumper Light Brackets

$29.00

DESCRIPTIONThese brackets allow you to mount most off-road lights under the rear of your bumper. They attach to existing bolts on the back of your bumper and allow the brackets to move vertically as well. FEATURES 11 Gauge #304 Stainless...

10-1006

$29.00

Add to Cart
Add to Cart

Baja Designs

Baja Designs S8 Brackets (Pair)

$15.95

These are replacement brackets for the Baja Designs S8 Lights. This includes two (2) brackets.

660307

$15.95

Add to Cart
Add to Cart

KC HiLiTES

KC HiLiTES Universal Wire Hider

$21.49

The KC Universal Wire Hider featuring 3M™ VHB™ double sided adhesive is as simple as it sounds. It is a ~3.3 ft strip of rubber extrusion that has an internal channel to help you hide your wires for a clean install of off-road lights and...

6300

$21.49

Add to Cart
Add to Cart

IP40 Bit for 1/4" and 3/8" Square Drive Torx-Plus Bit Socket

$5.00

This is a Torx Plus 40 bit which can be used with sockets, wrenches, screw drivers that accept a 1/4" square drive bit. This is commonly used on the 2021+ Ford Broncos which utilize a TP40 socket on the bumper (the included tool kit provided by Ford with...

IP40-BIT

$5.00

Add to Cart
Choose Options

4x4TruckLEDs

Headlight/Fog Light Extension Wires

$7.00

Add some extra length to your existing wires with these extension wires. Perfect for retrofit installations where you need to install a ballast/driver outside of your housing. A great idea whenever you need to splice into the factory wiring without fear...

$7.00

Choose Options
Add to Cart

J-B Weld

J-B Weld Ultimate Black RTV Silicone Gasket Maker and Sealant - 0.5 oz.

$5.00

J-B Weld Ultimate Black Gasket Maker & Sealant is an RTV (Room Temperature Vulcanized) Silicone gasketing material designed for use in mechanical assemblies where maximum petroleum and oil resistance is required. Upon curing, which occurs when the...

32509

$5.00

Add to Cart
Add to Cart

4x4TruckLEDs

4 Position Wiring Seal/Grommet, Raised (Pair)

$6.00

Got Wires? Well you're going to need a way to pass them through the rear-end of your housing without letting moisture in. Here's your answer! Easy: to use! Just bore out a 1" hole in the back or bottom of your headlight housing to seat the flanges of...

4WIRE-GROMMET-RAISED

$6.00

Add to Cart
Add to Cart

4x4TruckLEDs

4 Position Wiring Seal/Grommet, Flat (Pair)

$6.00

Got Wires? Well you're going to need a way to pass them through the rear-end of your housing without letting moisture in. Here's your answer! Easy: to use! Just bore out a 3/4" hole in the back or bottom of your headlight housing to seat the flanges...

4WIRE-GROMMET-FLAT

$6.00

Add to Cart
Choose Options

4x4TruckLEDs

CANbus Anti-Flicker Resistor

$20.00

When an LED/HID Headlight Conversion kit is installed in newer car model or cars with a computer controlled unit, often there is an error code showing on the dash board or the LED/HID Headlights keep flickering and will not stay on. This is due to the...

CANBUS

$20.00

Choose Options
Choose Options

Rubber Housing Cap (Pair)

$15.00

Seal It Up: Retrofit left the back side of your housings a bit open to the elements? These rubber housing caps may be the perfect solution to re-seal. Sizing: Available in seven different diameters to fit the most common headlight flanges:...

RUBBERCAP

$15.00

Choose Options
Add to Cart

LED Load Resistors (Pair)

$10.00

Used to correct hyper flashing, no flashing or burnt out bulb indicators associated with LED bulbs Due to LED bulbs drawing minimal current, certain applications could require the use of Load Resistors to correct hyper flashing, no flashing or burnt...

LOADRESISTOR

$10.00

Add to Cart