Installation Accessories

Add some extra length to your existing wires with these extension wires. Perfect for retrofit installations where you need to install a ballast/driver outside of your housing. A great idea whenever you need to splice into the factory wiring without fear...

Got Wires? Well you're going to need a way to pass them through the rear-end of your housing without letting moisture in. Here's your answer! Easy: to use! Just bore out a 1" hole in the back or bottom of your headlight housing to seat the flanges of...

Got Wires? Well you're going to need a way to pass them through the rear-end of your housing without letting moisture in. Here's your answer! Easy: to use! Just bore out a 3/4" hole in the back or bottom of your headlight housing to seat the flanges...

When an LED/HID Headlight Conversion kit is installed in newer car model or cars with a computer controlled unit, often there is an error code showing on the dash board or the LED/HID Headlights keep flickering and will not stay on. This is due to the...

Used to correct hyper flashing, no flashing or burnt out bulb indicators associated with LED bulbs Due to LED bulbs drawing minimal current, certain applications could require the use of Load Resistors to correct hyper flashing, no flashing or burnt...