null

Baja Designs LP4 Linkable by KR Off-Road Light Bar Kit (8 Lights)

SKU:
KRO-LP4LINK-8
  • Baja Designs LP4 Linkable by KR Off-Road Light Bar Kit (8 Lights)
  • Baja Designs LP4 Linkable by KR Off-Road Light Bar Kit (8 Lights)
  • Baja Designs LP4 Linkable by KR Off-Road Light Bar Kit (8 Lights)
  • Baja Designs LP4 Linkable by KR Off-Road Light Bar Kit (8 Lights)
  • Baja Designs LP4 Linkable by KR Off-Road Light Bar Kit (8 Lights)
  • Baja Designs LP4 Linkable by KR Off-Road Light Bar Kit (8 Lights)
MSRP: $4,199.53
$4,059.00
(You save $140.53 )

Description

The LP4 Linkable Kit by KR Off-Road is for the true off-road lighting enthusiast. Based on the popular XL Linkable Design this system takes it one step further. Linking multiple Baja Designs LP4 lights together allows for a tremendous amount of light down range in a truly unique footprint. Choose from 3, 4, 5, 6, 7 or 8 LP4 lights linked together. The kit includes everything you need from the mounting brackets and lights down to the wiring harness. 

The LP4 is the smallest variant in the LP lineup but maintains all of the power and features of its siblings. The LP4 features a total of 8,750 lumens and a 200 degree spread of useable LED light. This light pumps out 7,050 forward projecting lumens and 1,700 lumens of dedicated peripheral lighting courtesy of our patented Integrated Peripheral Technology (IPT). To keep your light performing at its highest potential, the LP4 integrates our proprietary Direct Ducted Cooling (DDC) technology. This feature allows air to travel through the front of the housing, over the rear heat sinks - drastically improving cooling capacity and performance. The addition of red, blue, or green backlight options alongside our original amber on the LP4 Pro gives enthusiasts the choice to customize their vehicle for shows, photo shoots or anywhere they want to bring attention.

With this 8x LP4 setup the inside 2 lights will be controlled from 1 switch harness while the outer 3 (on each side) lights will be controlled from the 2nd switch harness. Alternatively you can wire the light bar so that the inside 4 lights are controlled from 1 switch harness while the outer 2 (on each side) lights are controlled from the 2nd switch harness.

Please Note: This item is shipped unassembled. You will assemble the light bar when you receive it with the included hardware/toolset. Photos shown may not reflect the actual light bar configuration/size and is for demonstration purposes.

Specifications (per light)

  • Amperage Rating: 5.5 amps
  • Backlight Amperage Rating: 0.35 amps
  • Brightness: 8,857 lumen
  • IPT (Side Lighting) Amperage Rating: 1.0 amps
  • IPT Brightness: 1,972 lumen

Kit Includes

  • 8x Baja Designs LP4 Lights
  • 9x Baja Designs MC Links
  • 2x Baja Designs Pre-Load Mount
  • 2x Relay Harnesses (each relay harness includes a switch as well as an auxiliary switch panel connection)
  • 4x CrystaLux LP Series Linkable Pigtail
  • 2x CrystaLux LP Series Linkable Pigtail (Terminating)
  • 1x CrystaLux LP Series Linkable Pigtail Extension Harness (40")
  • 1x KR Off-Road Mounting Brackets (Pair)
  • 1x Toolkit

Dimensions
Please use the image and table below to determine the dimensions of the available LP4 Linkable Light Bars.

lp4-dimensions.jpg

  A B C D
3 Lights 22.46" 5.2" 20.31" 24.61"
4 Lights 29.34" 5.2" 27.19" 31.49"
5 Lights 36.21" 5.2" 34.06" 38.36"
6 Lights 43.09" 5.2"  40.94" 45.24"
7 Lights 49.97" 5.2"  47.82" 52.12"
8 Lights 56.84" 5.2"  54.69" 58.99"

Note: Each mounting bracket has a slotted hole for the bolt to go through and can be installed facing outwards or inwards. Dimension C & D represent the center of the slot in the mounting brackets. The slot allows for 0.625" of adjustment in each direction from the center. Also note that light bars with 3x LP4, 4x LP4, 5x LP4 & 6x LP4 will use a pre-load support bracket (this is installed between one of the links in the center and the LP4 light). This will add 0.188" to measurement A. For light bars with 7x LP4 or 8x LP4, two (2) pre-load support brackets will be installed which will add 0.376" to measurement A.

View AllClose