Wire Harnesses

Our CrystaLux Switch Harness for ARB Twin Compressors is an ideal harness for your air compressor if you are utilizing a switch. Many customers are mounting a switch right next to the compressor but are forced to run power to the switch separately...

Our CrystaLux 25' Power Extension Harness is ideal for anybody installing an ARB Twin Air Compressor inside their vehicle or in the rear of their vehicle. The power harness included with ARB compressors is not long enough to reach the cabin or rear...

This pigtail is used on the 2021+ Ford Broncos. It plugs in-line with the factory tail light harness and provides a 2-pin Weatherpack connector on the other end. This is typically used with one of our CrystaLux Reverse Harnesses to power auxiliary...

Looking for an easy way to connect a pair of lights at the rear of your truck together and control them from a switch? This is the harness for you. Our harness connects a pair of lights with the DT 2-Pin Connector (found on Diode Dynamics & Rigid...

This pigtail can be used on the 2021+ Ford F150 Raptor & 2022+ Ford Bronco Raptor. One side has the MX150 style connector on one side (which plugs into the factory wiring) and a Deutsch (DT) 4-Pin Connector on the other (commonly found on lights...

This pigtail can be used on the 2021+ Ford Bronco w/Plastic Bumper. On most Broncos w/Plastic Bumpers, there is a connector left by Ford that is used for the factory fog lights. This pigtail is about 6" long. One side has the H11 style connector on one...

This pigtail can be used on the 2021+ Ford Bronco w/HD Modular Bumper. On most Broncos w/HD Modular Bumper, there is a connector left by Ford behind the passenger and driver tow hooks. With some programming (via FORSCAN) and a new headlight/fog light...

This pigtail can be used on the 2021+ Ford Bronco w/HD Modular Bumper. On most Broncos w/HD Modular Bumper, there is a connector left by Ford behind the passenger and driver tow hooks. With some programming (via FORSCAN) and a new headlight/fog light...

This pigtail can be used on the 2021+ Ford Bronco w/HD Modular Bumper. On most Broncos w/HD Modular Bumper, there is a connector left by Ford behind the passenger and driver tow hooks. With some programming (via FORSCAN) and a new headlight/fog light...

This wiring harness is designed for use with A-Pillar lights and is cut to length to ensure a perfect fit. We've made sure the power lead is long enough to reach factory auxiliary switches along with aftermarket switch systems anywhere in the engine bay...

This wiring harness is designed for use with A-Pillar lights and is cut to length to ensure a perfect fit. We've made sure the power lead is long enough to reach factory auxiliary switches along with aftermarket switch systems anywhere in the engine bay...

This wiring harness is designed for use with A-Pillar lights and is cut to length to ensure a perfect fit. We've made sure the power lead is long enough to reach factory auxiliary switches along with aftermarket switch systems anywhere in the engine bay...

This pigtail can be used on the 2021+ Ford F150 Raptor & 2022+ Ford Bronco Raptor. It has a 2-Pin Weatherpack Connector on one side (which plugs into off-road pod lights) and an MX150 adapter on the other end (which connects to the factory fog...

This pigtail can be used on the 2021+ Ford F150 Raptor & 2022+ Ford Bronco Raptor. It has a 2-Pin Deutsch Connector on one side (which plugs into off-road pod lights) and an MX150 adapter on the other end (which connects to the factory fog...

This wiring harness is designed for triple fog light kits and is cut to length to ensure a perfect fit. It's designed to power 3 pairs of auxiliary lights from your OEM aux switches. Using DT style connectors (found on Diode Dynamics, Rigid Industries,...

This wiring harness is designed for triple fog light kits and is cut to length to ensure a perfect fit. It's designed to power 3 pairs of auxiliary lights from your OEM aux switches. Using DT style connectors (found on Diode Dynamics, Rigid Industries,...

This wiring harness is designed for triple fog light kits and is cut to length to ensure a perfect fit. It's designed to power 3 pairs of auxiliary lights from your OEM aux switches. Using DT style connectors (found on Diode Dynamics, Rigid Industries,...

Revised 7/18: Some users of the first-gen F150 LED conversion harness reported inconsistent functionality. Morimoto revised the harness and released the all-new version (literally, all new) as of July 2018. It will allow the LED headlights to function...

  This wiring harness is designed  to power 3 pairs of auxiliary lights from your OEM upfitters.    This harness is typically used with our Triple Fog Lights Kits (included at no charge with the kits) but can be used with other...

Looking for an easy way to connect a pair of lights at the rear of your truck together and control them from a switch? This is the harness for you. Our harness connects a pair of lights with the WP 2-Pin Connector (found on Baja Designs Lights) and...