Description
Our Bronco Air Compressor Mount & Storage Box provides a convenient and discreet mounting location for your ARB single or twin on-board air system compressor. With a focus on functionality and ease of use, our box is equipped with a rubber grommet and access hole, providing effortless wire management access for the compressor. The provided heat shielding material effectively insulates the container from heat radiating from the exhaust and external roadway temperatures, ensuring the longevity and reliability of your air compressor. The water-resistant skin that covers the ARB mounting holes offers protection against the elements, allowing you to tackle any terrain with confidence. This system streamlines the process of airing up and down, allowing you to enjoy your off-road adventures without the unnecessary hassle of an external compressor.
Our larger box is specifically designed to replace the smaller OEM box, ensuring a simple installation process using factory mounting points. Not only does it serve as a secure and stable mount for your compressor, but it also offers an additional storage compartment for your convenience. This spacious compartment is perfect for stowing air hoses, recovery equipment, tools, and more, keeping your essential gear within easy reach whenever you need it.
FAETURES
- Designed for ARB Single or Twin Air Compressors
- Hides Air Compressor in Convenient Location
- Utilizes Factory Mounting Location
- Access & Rubber Grommet for Wiring Solutions
- Provides Additional Storage Larger than Factory Box
- Heat Shield to Reduce Temperatures from Exhaust/Exterior
- Water Resistant Skin for ARB Mounting Holes
- Drain Plugs for Use as a Small Day Cooler
POWER EXTENSION HARNESS
Our CrystaLux 13' Power Extension Harness is ideal for anybody installing an ARB Twin Air Compressor inside their vehicle or in the rear of their vehicle. The power harness included with ARB compressors is not long enough to reach the cabin or rear of your truck, which is where our extension harness comes into play. Utilizing dual 10 gauge power leads for the positive and negative our extension harness ensures minimal voltage drop to the air compressor. The complete extension is 10' long allowing you to easily mount an air compressor anywhere on your vehicle. One side of the harness has a pre-terminated male plug which plugs into the ARB power harness (which is included with your compressor). The other end is left un-terminated which allows you to route the harness through holes and grommets. A rubber grommet is included with your kit to ensure a clean installation. Simply plug the harness into the ARB power harness, route your wire as you see fit and then slide on the included terminal connector and you're done. Our included terminal connector requires no tools and the power wires just slide right into it.
OPTIONAL ADD-ONS
COMPRESSOR
We offer a few options for AIR Compressors. We offer the ARB Single and Twin Compressors.
Average inflation time from 15PSI to 30PSI with 33" Tires
- ARB Single Compressor: 1 Minute, 45 Seconds
- ARB Twin Compressor: 55 seconds
Average inflation time from 15PSI to 30PSI with 35" Tires
- ARB Single Compressor: 3 minutes
- ARB Twin Compressor: 1 minute
ARB Single compressors are 50% Duty Cycle at 100PSI.
ARB Twin Compressors are 100% Duty Cycle at 150PSI
ARB On-Board High Performance 12 Volt Air Compressor (CKMA12)
The most popular in our range, the ARB High Output Air Compressor has been constructed entirely of lightweight, high-grade materials and is available in both portable and vehicle mounted configurations. With a class-leading flow rate, this compressor has been designed for Air Locker® activation (on-board model), fast tire inflation and a range of other functions whether they be for work or play. The vehicle mounted kit comes with a full wiring loom and mounting hardware for easy installation, while the portable kit includes a 6 meter air hose, battery clamps, inflation kit, and a durable carry case.
Twin High Output Compressor (CKMTA12)
Providing optimum power, the ARB twin motor design delivers class-leading air flow for fast inflation purposes. Constructed of lightweight, high-strength engineering grade materials, it incorporates quality components for quiet operation and extended durability. The twin motors incorporate internal thermal protection against extreme temperature damage while a heavy duty in-line maxi fuse for each motor provides professional circuit protection. Available as either a portable kit with a 4L air tank, inflation accessories and a durable carry case or a vehicle mounted kit with associated wiring loom and mounting hardware.
PUMP UP KIT
ARB's Pump Up Kit; Includes High Temperature Hose; Quick-Connect Air Coupling with Dust Cap; Quick-Connect Tire Inflation Chuck, T-Piece Adapter, Tire Bead Seating Fitting, and Inflation Accessory Kit. This kit will work with the ARB and UDA compressors.
DIGITAL TIRE INFLATOR
ARB Digital Tire Inflator: Most four-wheel drivers understand the importance of running the correct tire pressures for different situations and or load variances. This is why it’s so important to carry an accurate air pressure gauge and tire inflation equipment in your vehicle, especially when driving off-road. The ARB digital tire inflator makes checking and adjusting your vehicle’s tire pressures a fast and simple operation thanks to its large easy to read digital blue backlight display, big thumb operated inflator button and easy access deflator bleed button.
LockNFlate Digital Tire Inflator: Heavy-duty, aluminum diecast inflation/deflation gun with flexible stainless steel hose and LockNFlate® Air Chuck! The LockNFlate Air Chuck has six steel jaws lock onto any Schrader valve to create a secure, hands-free connection.
