null

KR Off-Road Bezel/Flush Triple Fog Light Brackets for 2021+ Ford Bronco (HD Modular Bumper)

SKU:
30-2008
  • KR Off-Road Bezel/Flush Triple Fog Light Brackets for 2021+ Ford Bronco (HD Modular Bumper)
  • KR Off-Road Bezel/Flush Triple Fog Light Brackets for 2021+ Ford Bronco (HD Modular Bumper)
  • KR Off-Road Bezel/Flush Triple Fog Light Brackets for 2021+ Ford Bronco (HD Modular Bumper)
  • KR Off-Road Bezel/Flush Triple Fog Light Brackets for 2021+ Ford Bronco (HD Modular Bumper)
  • KR Off-Road Bezel/Flush Triple Fog Light Brackets for 2021+ Ford Bronco (HD Modular Bumper)
  • KR Off-Road Bezel/Flush Triple Fog Light Brackets for 2021+ Ford Bronco (HD Modular Bumper)
$229.00

Description

Give that Bronco some much needed lighting with these KR Off-Road Flush/Bezel Triple Fog Light Brackets. There stainless steel brackets are made out of 12 gauge stainless steel. Powder coated black to ensure a durable finish, these heayv-duty brackets feature a bezel/flush mount design that gives that fog opening a finished look while giving you adjustability in where the lights aim.

NOTE: The HD Modular Bumper uses a Torx Plus 40 (TP40) socket. Please do not use a Torx 40 (T40) socket (you could strip your bolts). Ford did not provide this bit in your tool set. They only provided a TP30 and TP50 bit. If you'd like to add-on a TP40 bit please click here.

Features

  • 12 Gauge #304 Stainless Steel
  • Powder Coated Black Finish
  • Bolt-On Installation
  • Designed & Manufactured in the USA

Includes:

  • 1 Pair of Brackets
  • Instructions
  • Optional: Baja Designs Squadron Spacers (required only if being used with Baja Designs Squadron series lights)

Fitment:

  • 2021+ Ford Bronco w/HD Modular Bumper

Light Compatibility:

  • 1x Baja Designs Squadron & 2x Baja Designs S2 (per side)
    or
  • 1x Diode Dynamics SS3 & 2x Diode Dynamics SSC2 (per side)

Warranty:

  • Lifetime Warranty for the original owner.

Note: Lights are not included. The HD Modular Bumper uses a Torx Plus 40 (TP40) socket. Please do not use a Torx 40 (T40) socket (you could strip your bolts)

Optional Wiring Harness: Add our optional wiring harness which will allow you to connect your Baja Designs or Rigid Industries lights to your OEM upfitters.

  • Baja Designs: This harness has 3x Weatherpack (WP) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Baja Designs lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal)
    wp-harness2.jpg
  • Diode Dynamics (3x SS3 without Backlight): This harness has 3x Deutsch (DT) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Diode Dynamics SS3 lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal)
    harness-dt2.jpg
  • Diode Dynamics (3x SS3/SSC2 with Backlight): This harness has 3x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 3 pairs of Diode Dynamics SS3/SSC2 lights with backlight. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SS3/SSC2 back-light control cable (which activates the back-light on all of the SS3/SSC2 lights).
    60-1004-3.jpg

  • Diode Dynamics (2x SS3 & 1x SSC2): This harness has 2x Deutsch (DT) 2-pin connectors & 1x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 2 pairs of Diode Dynamics SS3 lights & 1 pair of Diode Dynamics SSC2 lights. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SSC2 back-light control cable (which activates the back-light on all of the SSC2 lights).
    60-1006-3.jpg
  • Diode Dynamics (1x SS3 & 2x SSC2): This harness has 1x Deutsch (DT) 2-pin connectors & 2x Deutsch (DT) 4-pin connector pre-installed (on each side) which will plug into 1 pair of Diode Dynamics SS3 lights & 2 pairs of Diode Dynamics SSC2 lights. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the SSC2 back-light control cable (which activates the back-light on all of the SSC2 lights).
    60-1005-3.jpg
  • Rigid Industries D-Series: This harness has 3x Deutsch (DT) 2-pin connectors pre-installed (on each side) which will plug into 3 pairs of Rigid Industries D-Series lights. The other side has 3x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal).
    harness-dt2.jpg
  • Rigid Industries Radiance: This harness has 9x (on each side) weatherproof/heat shrinkable wires which terminate onto the Rigid Industries Radiance Light wires. The other side has 4x weatherproof/heat shrinkable wire connectors for quick termination to OEM auxiliary switches (along with a ground ring terminal). 3 of the wires are for the 3x pairs of lights with the 4th wire being the Radiance back-light control cable (which activates the back-light on all of the Radiance lights).
    harness-radiance.jpg
View AllClose