Our CrystaLux XHP50 / XHP70 Series LED Headlight Bulbs offer the highest quality and materials available in an LED Headlight Bulb. Manufactured using 6063 alloy for the light bulb body our LED Headlight Bulbs offer the greatest heat dissipation available. Offering the best LED technology available from CREE our bulbs utilize the XHP50 / XHP70 LED chip. With 6,000 lumen of light output each these bulbs are sure to light up the road. The dual rolling, non-oil, high temperature durability nylon fans are built into the base of each bulb ensuring a long-lasting lifespan. The bulbs are offered in a 6500 Kelvin temperature rating to achieve that modern look of LED lighting typically offered on high-end luxury cars.
Our XHP50 Series Bulbs are designed to work well in all styles of headlights housings. Our XHP70 Series Bulbs are designed specifically for projection style headlight housings.
Note: Some newer vehicles may require a CANbus anti-flicker resistor as the LEDs use less current then typical halogen lights. This can cause lights to either flicker or go out.
- Set of 2 bulbs. Each bulb has a 20W CREE XHP50 / XHP70 LED. Available in the following bulb sizes: XHP50: H4, H7, H8, H9, H11, H13, 9003, 9004, 9005, 9006, 9007, 9008, 9040, 9045, 9145, HB2, HB3, HB4 & HB5. XHP70: D1, D2, D3, D4 & H7.
- Light Output: 6000 lumens. Waterproof: IP65. Voltage: 12-24 VDC.
- 6500 Kelvin Rating. Offers you the look of a high-end luxury car.
- CANbus ready
- Includes a 2 year warranty against manufacturer defects.
Input Power: L/36W, H/36W
Operating Voltage: DC12-24V
Luminous Flux: L/6000LM, H/6000LM
IP Rating: IP65
Light Source Model: XHP50 / XHP70
Color Temperature: 6500K
Heat Dissipation Theory: Aviation Aluminum 6063
Operating Life: >30,000 Hours
Operating Temperature: -40° F ~ 176° F
-(2) CrystaLux XHP50 / XHP70 LED Bulbs
-(2) LED Ballasts/Drivers
-(1) Installation Manual
Sold as a pair. Actual images shown may vary from actual product.
NOTE: Due to the design of the rubber boot on the OEM Headlight housing, you may need to trim a small portion of the rubber boot due to the length of the LED bulb. This trimming should take place on the inner collar of the rubber boot. You'll also want to install the collar of the LED bulb first, then the boot, the re-insert the LED bulb through the boot and into the collar. Ensure the bulbs LED diodes are oriented at 3 and 9 o'clock and that it is seated all the way down (so that it does not bounce around while driving)